F510L-CL Ceiling Fan Wall Control for Minka-Aire
- Fan Model # F510L-CL
- Ceiling Fan Wall Control
- Fits 1 model
For the Minka-Aire F510L-CL Spacesaver ceiling fan: a new wall control with four speeds and a dimmer on two sliders.
$29.95
Ships today from FanRemotes.com
if ordered in the next
In stock
- 1-Year WarrantyOn every product
- Same-Day ShippingIn-stock orders by 4 PM
- 90-Day ReturnsSee return policy
- Expert Support(816) 586-8457Mon–Fri, 8 AM – 5 PM CT
Compatible Models
This replacement wall control for the Minka-Aire F510L-CL fits 1 model. Check the model number on your fan’s label.
- F510L-CL Spacesaver 26-in LED Coal
Not sure it’s the right one? Call (816) 586-8457 or email info@fanremotes.com and we’ll check it against your fan for you.
About the Minka-Aire F510L-CL Wall Control
The Minka-Aire F510L-CL is the 26-inch Spacesaver ceiling fan in coal with an LED light. Swap in this control and you're back to four speeds and a dimmer on two sliders.
It is made for the Minka-Aire F510L-CL. Check the model sticker on the fan: if it reads F510L-CL, this is the wall control you need. Set the pull chains first, then wire it into a standard single-gang box.
- Full-range dimming up to 300 W
- Single-gang, 3-wire hookup
- Rated 1.25 A fan load at 120 V
Safety before you start
Shut off the circuit at the breaker panel, not just the wall switch, and put a piece of tape over the breaker so nobody flips it back. Check the wires with a non-contact voltage tester before you touch them. If the box has more than one circuit, test every wire. Work with dry hands and a flashlight.
Four speeds plus off
The fan slider has four speeds and off, one more step than many pull chains offer. Slide it to the bottom to turn the fan off, and do the same with the light slider to switch the light off. Everything else is in between.
Before you order
- Based on its product line, we expect the F510L-CL to use this wall control. Compare your old wall control with our photos, or send us a picture before you order.
- Do not use it on an outlet, a motor appliance or a transformer-fed light.
Setup & Pairing
Work with the breaker off from start to finish.
- Turn the circuit off at the breaker panel before anything else.
- Set the fan chain on High and the light chain on; they stay there.
- Make sure there's one wire for the fan and another for the light between the box and the ceiling.
- Wire-nut the line, fan and light leads to the matching house wires, then attach any ground wire to the ground screw.
- Screw the control into the box, reuse the old wall plate, and switch the breaker on.
If anything about the wiring looks unfamiliar, stop and call a licensed electrician.
In the box: Dual-slide fan and light wall control for the Minka-Aire F510L-CL, plus mounting screws, wire nuts and instructions.
Product Details
| Fan Model | F510L-CL |
|---|---|
| Fan Brand | Minka-Aire |
| Product Type | Ceiling Fan Wall Control |
| Made By | Comfort Direct |
| Condition | New |
| Fan speeds | 4 + off |
| Light | Full-range slide dimmer |
| Fan load | 1.25 A maximum |
| Light load | 300 W maximum, rated for incandescent fan lights |
| Power | 120 V, 60 Hz |
| Wiring | 3-wire: hot, fan and light, with separate fan and light wires to the ceiling |
| Wall box | Standard single-gang wall-switch box |
| Warranty | 1 year |
| Compatible Models | 1 (see list) |
| Availability | In stock |
| Ships | Same business day if ordered by 4 PM |
| Returns | 90 days on unused items |
Why Buy From FanRemotes.com?
- 1-Year WarrantyEvery product is covered against defects
- Same-Day ShippingIn-stock orders placed by 4 PM ship the same business day
- 90-Day Return PolicyBuy with confidence
- Real Remote Experts(816) 586-8457 · Mon–Fri, 8 AM – 5 PM CT
Frequently Asked Questions
Will this replacement wall control for the Minka-Aire F510L-CL fit my ceiling fan?
It fits the 1 model listed under Compatible Models on this page. If your model isn’t listed, call us at (816) 586-8457 and we’ll check for you.
Does it work with LED bulbs?
The dimmer is rated for incandescent fan light kits up to 300 W. We can't promise smooth dimming with every LED bulb, and it is not for CFL bulbs.
What should my pull chains be set to?
Set the fan chain to High and turn the light chain on, then leave them. The wall control does the rest.
How much fan can it handle?
Up to 1.25 A at 120 V. Check the label on your fan motor.
Is this the original Minka-Aire part?
No. It's a new Comfort Direct replacement built to work like the original wall control, and it carries our 1-year warranty.
What tools will I need?
A screwdriver, a wire stripper, a non-contact voltage tester and a few wire nuts cover it. A flashlight helps in a dark wall box.
When will my order ship?
In-stock orders placed by 4 PM, Monday to Friday, ship the same business day.
What is your return policy?
You can return items within 90 days. Items must be unused and uninstalled, in their original packaging. No restocking fees. Please read our return policy before sending anything back. Questions? Call (816) 586-8457 or email info@fanremotes.com.
Is there a warranty?
Yes. Every product we sell comes with a 1-year warranty against defects. If it fails because of a defect, contact us and we’ll send a replacement.
Help & How-To Guides
Related products
-


P2631-30 Ceiling Fan Wall Control for Progress Lighting
0 out of 5$39.95 Add to cart -


P2506 Ceiling Fan Wall Control for Progress Lighting
0 out of 5$39.95 Add to cart -

27182 Ceiling Fan Wall Control For Hunter Fans
0 out of 5$29.95 Add to cart -


TW32WH Ceiling Fan Wall Control for Fanimation
0 out of 5$49.95 Add to cart -


P2505 Ceiling Fan Wall Control for Progress Lighting
0 out of 5$39.95 Add to cart