Skip to content

Same-day shipping on in-stock orders by 4 PM CT Free shipping over $35 90-day returns

For Hampton Bay ceiling fansDirect Replacement

YG423-BN Ceiling Fan Remote Control for Hampton Bay

Remote for the Hampton Bay Reagan II 52-in LED ceiling fan in brushed nickel, model YG423-BN, with three speeds, off and light dimming.

$29.95

Out of stock product

  • 1-Year WarrantyOn every product
  • Same-Day ShippingIn-stock orders by 4 PM
  • 90-Day ReturnsSee return policy
  • Expert Support(816) 586-8457Mon–Fri, 8 AM – 5 PM CT

Compatible Models

This replacement remote for the Hampton Bay YG423-BN fits 1 model. Check the model number on your fan’s label.

  • YG423-BN Reagan II 52-in LED Brushed Nickel

Not sure it’s the right one? Call (816) 586-8457 or email info@fanremotes.com and we’ll check it against your fan for you.

Need help finding your model number?

About the Hampton Bay YG423-BN Remote

The Reagan II YG423-BN pairs a 52-in brushed nickel fan with an LED light. When its remote quits, you are stuck with whatever setting it was left on. Our replacement brings back three speeds, off, and light on/off with dimming.

It is made for the Hampton Bay YG423-BN. Read the model on the motor housing label, then set four DIP switches under the battery cover to the receiver's pattern and test.

  • High, medium and low fan speeds plus off
  • Dim the light from your seat
  • Works with UC7067RC and FAN28R-style receivers
  • Radio signal in the 304 MHz band, no aiming
  • Wall mount with screws included

Where the receiver sits

The receiver is a small box tucked inside the fan's canopy, the cover that hides the mounting bracket at the ceiling. With the breaker off, loosen the canopy screws and lower it. The receiver's DIP switches are usually visible on its end or under a small cover.

A spare for the bedroom

Two remotes set to the same code will both run the fan. Many people keep one in the wall holder and one on the nightstand. Set the second remote's switches to match the first and you're done.

Before you order

  • Your fan needs a matching 4-DIP-switch receiver, such as the UC7067FMRX or FAN28R. This remote does not include a receiver.
  • If your old remote has separate up-light and down-light buttons, compare it with our product photos before you order.

Setup & Pairing

Here is the whole setup, start to finish.

  1. Cut power to the fan at the breaker before you start.
  2. Lower the canopy and find the DIP switch settings on the receiver.
  3. Set the four switches inside the new remote to match the receiver exactly.
  4. Fit the A23 battery and snap the cover shut.
  5. Put the canopy back, restore power and check every button.

No programming is involved; the switches do all the work.

In the box: Replacement remote for the YG423-BN fan and a wall mount with screws. Battery not included.

Product Details

Fan ModelYG423-BN
Fan BrandHampton Bay
Product TypeCeiling Fan Remote
Made ByComfort Direct
ConditionNew
Frequency304 MHz band (303.2 MHz)
Pairing4 DIP switches, set to match your fan's receiver
BatteryOne 12V A23 (not included)
Fan speeds3 (High, Medium, Low) + off
LightOn/off and dimming
Motor typeAC-motor fans only
Wall mountIncluded, with screws
Warranty1 year
Compatible Models1 (see list)
AvailabilityOut of stock
Returns90 days on unused items
Not sure this is the right remote?Our team will check it against your fan before you order.(816) 586-8457 · info@fanremotes.comMon–Fri, 8 AM – 5 PM CT

Why Buy From FanRemotes.com?

  • 1-Year WarrantyEvery product is covered against defects
  • Same-Day ShippingIn-stock orders placed by 4 PM ship the same business day
  • 90-Day Return PolicyBuy with confidence
  • Real Remote Experts(816) 586-8457 · Mon–Fri, 8 AM – 5 PM CT

Frequently Asked Questions

Will this replacement remote for the Hampton Bay YG423-BN fit my ceiling fan?

It fits the 1 model listed under Compatible Models on this page. If your model isn’t listed, call us at (816) 586-8457 and we’ll check for you.

Will it work on a DC-motor or smart fan?

No. It is for AC-motor fans with a 4-DIP-switch receiver, not DC, Bluetooth or Wi-Fi fans.

How many speeds does it have?

Three: high, medium and low, plus a dedicated off button.

How big is it?

About 2 x 6 x 1 inches, a comfortable size for one hand and the wall holder.

What's in the box?

The replacement remote and a wall mount with screws. The A23 battery is sold separately.

Can I reverse the fan from this remote?

No. This remote covers fan speeds, off and the light. To change direction, use the switch on the fan's motor housing.

When will my order ship?

In-stock orders placed by 4 PM, Monday to Friday, ship the same business day.

What is your return policy?

You can return items within 90 days. Items must be unused and uninstalled, in their original packaging. No restocking fees. Please read our return policy before sending anything back. Questions? Call (816) 586-8457 or email info@fanremotes.com.

Is there a warranty?

Yes. Every product we sell comes with a 1-year warranty against defects. If it fails because of a defect, contact us and we’ll send a replacement.