For Fanimation ceiling fansDirect Replacement

TW30WH Ceiling Fan Wall Control for Fanimation

Part # TW30WH
Ceiling Fan Wall Control

Replacement wall control for Fanimation ceiling fans that came with the TW30WH, with six DC speeds, reverse and a dimmable light.

$49.95

Ships today from FanRemotes.com

if ordered in the next

1-Year WarrantyOn every product
Same-Day ShippingIn-stock orders by 4 PM
90-Day ReturnsSee return policy
Expert Support(816) 586-8457Mon–Fri, 8 AM – 5 PM CT

Category: Ceiling Fan Wall Control Brand: Comfort Direct, Fanimation

Will This Wall Control Fit?

This wall control is made to replace the TW30WH. Check the label on your old wall control — if it reads TW30WH, this is the one you need.

Need help finding your model number? Not sure? Call (816) 586-8457 or email info@fanremotes.com.

About the Fanimation TW30WH Wall Control

A worn or failed TW30WH doesn't mean a new fan. This wall control restores a dimmable light, six fan speeds and reverse. Remove the wall plate and look at the body of the old wall control: the TW30WH number is on its label. The original has a single light button, which this version matches.

If TW30WH is the number on your old wall control, you're in the right place. After wiring, a press of SET starts a short learning run, and then it's ready.

Six DC fan speeds plus off
Reverse button
Light on/off with full-range dimming
Shuts down if motor power goes over 80W

The 5-minute learning run

After you press SET, the fan runs in both directions for about 5 minutes and then stops. That's normal: the fan is learning the blades. Once it stops, it's ready to use. If you change the blades later, run the setup again.

What the battery is for

One 12V A23 battery sits under the faceplate and powers the control's transmitter. When it gets weak, pop off the faceplate and swap it; nothing else needs to change.

Before you order

Not for AC-motor fans; DC-motor fans only.
Single light control only. If your old control has separate up light and down light buttons, choose our up/down-light version instead.

Setup & Pairing

You'll need a neutral wire in the box; check before you start.

Turn off power to the fan at the breaker.
Pop off the faceplate and fit the 12V A23 battery underneath.
Match the control's code switches to the fan's receiver, if the receiver has switches.
Wire the control into the wall box and mount it, then restore power.
Before 60 seconds pass, press and hold the SET button for 1-5 seconds.
The fan will spin both ways for about 5 minutes, then stop; that means it's paired.
If you ever change the blades, repeat this setup.

Tuck the wires neatly into the box so the control sits flat.

In the box: TW30WH replacement wall control, wall plate and mounting screws.

Product Details

Part Number	TW30WH
Fan Brand	Fanimation
Product Type	Ceiling Fan Wall Control
Made By	Comfort Direct
Condition	New
Fan speeds	6 + off
Reverse	Yes
Light	On/off with full-range dimming (on/off-only setting for non-dimmable bulbs)
Wiring	120V, 60 Hz in-wall: line, neutral and ground from the wall box; one black lead to the fan motor. Neutral wire required.
Battery	One 12V A23, fits under the faceplate
Pairing	Code switches + SET button
Mounting	Fits a standard single-gang wall box
Warranty	1 year
Availability	In stock
Ships	Same business day if ordered by 4 PM
Returns	90 days on unused items

Not sure this is the right wall control?Our team will check it against your fan before you order.(816) 586-8457 · info@fanremotes.comMon–Fri, 8 AM – 5 PM CT

Why Buy From FanRemotes.com?

1-Year WarrantyEvery product is covered against defects
Same-Day ShippingIn-stock orders placed by 4 PM ship the same business day
90-Day Return PolicyBuy with confidence
Real Remote Experts(816) 586-8457 · Mon–Fri, 8 AM – 5 PM CT

Frequently Asked Questions

Does it need a neutral wire?

Yes. The control is powered from line and neutral in the wall box.

What is the battery for?

One 12V A23 battery sits under the faceplate and powers the control's transmitter.

Will it run an AC-motor fan?

No. It's for DC-motor fans only.

Do I need to redo setup if I change the blades?

Yes. Run the SET setup again after a blade change.

Can I use it with CFL bulbs?

Yes. Set the light switch inside the control to on/off-only (D) for non-dimmable bulbs.

When will my order ship?

In-stock orders placed by 4 PM, Monday to Friday, ship the same business day.

What is your return policy?

You can return items within 90 days. Items must be unused and uninstalled, in their original packaging. No restocking fees. Please read our return policy before sending anything back. Questions? Call (816) 586-8457 or email info@fanremotes.com.

Is there a warranty?

Yes. Every product we sell comes with a 1-year warranty against defects. If it fails because of a defect, contact us and we’ll send a replacement.