For Progress Lighting ceiling fansDirect Replacement

P2501-09 Ceiling Fan Wall Control for Progress Lighting

Fan Model # P2501-09
Ceiling Fan Wall Control
Fits 1 model

Made for the Progress Lighting P2501-09 AirPro fan, this wall control brings back slide fan speed control and a dimmer rated up to 300 watts.

$29.95

Ships Monday from FanRemotes.com

1-Year WarrantyOn every product
Same-Day ShippingIn-stock orders by 4 PM
90-Day ReturnsSee return policy
Expert Support(816) 586-8457Mon–Fri, 8 AM – 5 PM CT

Category: Ceiling Fan Wall Control Brand: Comfort Direct

Compatible Models

This replacement wall control for the Progress Lighting P2501-09 fits 1 model. Check the model number on your fan’s label.

P2501-09 AirPro 52-in Brushed Nickel

Not sure it’s the right one? Call (816) 586-8457 or email info@fanremotes.com and we’ll check it against your fan for you.

Need help finding your model number?

About the Progress Lighting P2501-09 Wall Control

Model P2501-09 is Progress Lighting's 52-inch AirPro ceiling fan in brushed nickel. Our replacement wall control restores fan speed and light dimming on separate circuits.

If the sticker on your fan's motor housing says P2501-09, you've found the right page. It needs separate fan and light wires from the wall box.

Single-gang fit with switch plate included
Rated 120V, 1.25A fan motor
UL/cUL listed, indoor use
Gloss white finish

Two circuits needed

This control runs the fan and the light separately, so the wall box needs one wire to the fan and another to the light. If a single switched wire feeds both, the dimmer can't work without extra wiring. Look in the box: a red wire alongside the black is a common sign of separate circuits, but test before you assume.

No receiver in the fan

Because this control wires straight to the fan, it shouldn't be used on a fan with a remote receiver in the canopy. Remote-ready AirPro fans use a different, receiver-based wall control.

Before you order

Not for multiple fans on one control.
Not for fans with a remote receiver in the canopy; for remote-ready AirPro fans use the P2631-30 instead.

Setup & Pairing

If you've replaced a wall switch before, this will feel familiar.

Shut off the circuit at the breaker panel.
Wire the control to the fan and light circuits, following the included diagram.
Seat the control in the box, add the switch plate, turn the breaker on and pull the fan chain to high.

Keep the instructions with your fan's manual for next time.

In the box: Replacement wall control for the Progress Lighting P2501-09 fan, plus a switch plate.

Product Details

Fan Model	P2501-09
Fan Brand	Progress Lighting
Product Type	Ceiling Fan Wall Control
Made By	Comfort Direct
Condition	New
Fan speeds	4 + off (1 = fastest, 4 = slowest)
Light	Full-range dimmer, up to 300W, incl. dimmable LEDs
Rating	120V AC, 60 Hz, 1.25A max fan motor
Wiring	Requires two separate circuits (fan and light); fits a single-gang box
Size	2.75 x 4.25 in, gloss white
Listing	UL/cUL, dry indoor locations
Wall plate	Included
Warranty	1 year
Compatible Models	1 (see list)
Availability	In stock
Ships	Same business day if ordered by 4 PM
Returns	90 days on unused items

Not sure this is the right wall control?Our team will check it against your fan before you order.(816) 586-8457 · info@fanremotes.comMon–Fri, 8 AM – 5 PM CT

Why Buy From FanRemotes.com?

1-Year WarrantyEvery product is covered against defects
Same-Day ShippingIn-stock orders placed by 4 PM ship the same business day
90-Day Return PolicyBuy with confidence
Real Remote Experts(816) 586-8457 · Mon–Fri, 8 AM – 5 PM CT

Frequently Asked Questions

Will this replacement wall control for the Progress Lighting P2501-09 fit my ceiling fan?

It fits the 1 model listed under Compatible Models on this page. If your model isn’t listed, call us at (816) 586-8457 and we’ll check for you.

Will this work with LED bulbs?

Yes, with dimmable LEDs, up to 300W of light.

Will it work with a fan that has a remote receiver?

No. It's for fans without a receiver in the canopy.

What should the fan's pull chain be set to?

High. Then the slide sets the speed.

Is a wall plate included?

Yes. A switch plate comes in the box.

Do I need separate wires for the fan and light?

Yes. It needs one circuit for the fan and another for the light.

When will my order ship?

In-stock orders placed by 4 PM, Monday to Friday, ship the same business day.

What is your return policy?

You can return items within 90 days. Items must be unused and uninstalled, in their original packaging. No restocking fees. Please read our return policy before sending anything back. Questions? Call (816) 586-8457 or email info@fanremotes.com.

Is there a warranty?

Yes. Every product we sell comes with a 1-year warranty against defects. If it fails because of a defect, contact us and we’ll send a replacement.