For Harbor Breeze ceiling fansDirect Replacement

BRD48OSB6LR Ceiling Fan Receiver for Harbor Breeze

Fan Model # BRD48OSB6LR
Ceiling Fan Receiver
Fits 1 model

Replacement receiver for the Harbor Breeze Bradbury 48-in Bronze LED ceiling fan, model BRD48OSB6LR, restoring three speeds and a dimmable light from your remote.

$33.95

Ships today from FanRemotes.com

if ordered in the next

In stock

1-Year WarrantyOn every product
Same-Day ShippingIn-stock orders by 4 PM
90-Day ReturnsSee return policy
Expert Support(816) 586-8457Mon–Fri, 8 AM – 5 PM CT

Category: Ceiling Fan Receiver Brand: Comfort Direct, Harbor Breeze

Compatible Models

This replacement receiver for the Harbor Breeze BRD48OSB6LR fits 1 model. Check the model number on your fan’s label.

BRD48OSB6LR Bradbury 48-in Bronze LED

Not sure it’s the right one? Call (816) 586-8457 or email info@fanremotes.com and we’ll check it against your fan for you.

Need help finding your model number?

About the Harbor Breeze BRD48OSB6LR Receiver

The Harbor Breeze Bradbury 48-in with the bronze finish and built-in LED light is model BRD48OSB6LR. Lowe's sold it as item 2807159. When the receiver fails, the remote stops running the fan and light even with a fresh battery. Our replacement brings back three fan speeds plus off and full light dimming.

Check the model label on your fan: if it reads BRD48OSB6LR, this is the one you need. Pairing takes one button and about 30 seconds.

Pairs in about 30 seconds by holding one button
Restores remote control without replacing the fan
3 fan speeds plus off
Learning-code pairing, no DIP switches

Wobble and noise are not the receiver

A receiver controls power, so it will not fix a wobble or a clicking blade. Those usually come from loose blade screws or an unbalanced blade. If your fan wobbles, tighten the blade hardware and use a balancing kit; the receiver swap is a separate job.

Wire-nut tips

Hold the wire ends side by side, push the wire nut on and twist clockwise until it is snug. Give each wire a gentle tug to confirm it is held, and make sure no bare copper shows below the nut. A wrap of electrical tape adds extra security in a tight canopy.

Before you order

Compare your old receiver with the photos on this page, or contact us with your fan's model number and we'll confirm the fit.
Some fans came with a plug-in receiver that has a square plug instead of wire-nut leads. Contact us if yours has a plug.

Setup & Pairing

Plan on about an hour, most of it spent at the canopy.

Turn off power to the BRD48OSB6LR at the breaker.
Lower the canopy and disconnect the old receiver, noting which wire went where.
Connect the new receiver with wire nuts the same way the old one was connected.
Make sure other fans with learning receivers are switched off, so only this one learns the remote.
With the remote ready, turn the power on and hold 0 (fan off) within about 30 seconds until you see the light blink twice.
Try low, medium and high, then the light, before closing up the canopy.

In the box: Replacement receiver for the BRD48OSB6LR.

Product Details

Fan Model	BRD48OSB6LR
Fan Brand	Harbor Breeze
Product Type	Ceiling Fan Receiver
Made By	Comfort Direct
Condition	New
Fan speeds	3 + off
Light	On/off and dimming
Frequency	304.25 MHz
Pairing	Learning code, no DIP switches
Installation	Wire-nut connections
Warranty	1 year
Compatible Models	1 (see list)
Availability	In stock
Ships	Same business day if ordered by 4 PM
Returns	90 days on unused items

Not sure this is the right receiver?Our team will check it against your fan before you order.(816) 586-8457 · info@fanremotes.comMon–Fri, 8 AM – 5 PM CT

Why Buy From FanRemotes.com?

1-Year WarrantyEvery product is covered against defects
Same-Day ShippingIn-stock orders placed by 4 PM ship the same business day
90-Day Return PolicyBuy with confidence
Real Remote Experts(816) 586-8457 · Mon–Fri, 8 AM – 5 PM CT

Frequently Asked Questions

Will this replacement receiver for the Harbor Breeze BRD48OSB6LR fit my ceiling fan?

It fits the 1 model listed under Compatible Models on this page. If your model isn’t listed, call us at (816) 586-8457 and we’ll check for you.

How do I know the receiver is the problem?

If a fresh remote battery does not help and the fan ignores the remote, runs on one speed or will not turn off, the receiver is the likely cause.

What do I do with the ground wire?

Reconnect the green or bare ground wire exactly as it was. It does not affect pairing, but it matters for safety.

Is there a warranty?

Yes. Every receiver comes with our 1-year warranty.

I have two fans with the same remote. How do I keep them separate?

Pair each fan on its own with the other fan powered off, and keep one remote per fan. Labeling the remotes by room helps.

Do I need an electrician?

Not usually. If you are comfortable turning off a breaker and using wire nuts, you can do it. If the wiring looks damaged or confusing, call a licensed electrician.

When will my order ship?

In-stock orders placed by 4 PM, Monday to Friday, ship the same business day.

What is your return policy?

You can return items within 90 days. Items must be unused and uninstalled, in their original packaging. No restocking fees. Please read our return policy before sending anything back. Questions? Call (816) 586-8457 or email info@fanremotes.com.

Is there a warranty?

Yes. Every product we sell comes with a 1-year warranty against defects. If it fails because of a defect, contact us and we’ll send a replacement.