6211632B1 Ceiling Fan Reverse Module for Hampton Bay

About the Hampton Bay 6211632B1 Reverse Module

When everything on your fan works except reverse, the 6211632B1 module is the likely culprit. This replacement brings back reverse from your remote or wall control. 6211632B1 is printed on the label of the small module inside the fan's switch housing or canopy. It sits near the receiver but is a separate part with its own label.

Check the label on your old module: if it reads 6211632B1, this is the replacement. Plug it in where the old one was and the reverse button works again.

• 1-year warranty
• Brings back the reverse button
• Plug-and-play, no programming
• For fans with UC7067 or FAN28R receivers

Module or receiver?

If everything works except changing blade direction, the reverse module is the part to replace. If speeds, the light or power aren't working, the receiver is the problem instead. This module can't fix a failed receiver.

Receivers it works with

It works with fans that use UC7067-series receivers, such as the UC7067GMRX, UC7067FMRX and UC7067FCRX, and with FAN28R and FAN28RUDL receivers.

Before you order

• Not for fans that reverse with a slide switch on the motor housing.
• Not for DC-motor fans.

Setup & Pairing

Here's the swap, step by step.

1. Switch the breaker for the fan off.
2. Remove the switch housing or canopy cover to reach the reverse module.
3. Photograph the old module's connection and unplug it.
4. Plug the new one in the same way and tuck it securely in place.
5. Reassemble, restore power and test the reverse button on your remote or wall control.

If reverse still doesn't work, the remote or receiver may not support it; call us.

In the box: 1 6211632B1 reverse module for your fan.