For Litex ceiling fansDirect Replacement

RS54BNK6LR Ceiling Fan Receiver for Litex

Fan Model # RS54BNK6LR
Ceiling Fan Receiver
Fits 1 model

Restore three speeds and light dimming to the Litex Rossman 54-in Brushed Nickel LED ceiling fan (RS54BNK6LR) with this wire-nut replacement receiver.

$33.95

Ships Monday from FanRemotes.com

In stock

1-Year WarrantyOn every product
Same-Day ShippingIn-stock orders by 4 PM
90-Day ReturnsSee return policy
Expert Support(816) 586-8457Mon–Fri, 8 AM – 5 PM CT

Category: Ceiling Fan Receiver Brand: Comfort Direct

Compatible Models

This replacement receiver for the Litex RS54BNK6LR fits 1 model. Check the model number on your fan’s label.

RS54BNK6LR Rossman 54-in Brushed Nickel LED

Not sure it’s the right one? Call (816) 586-8457 or email info@fanremotes.com and we’ll check it against your fan for you.

Need help finding your model number?

About the Litex RS54BNK6LR Receiver

Model RS54BNK6LR is the 54-in Rossman fan from Litex with a brushed nickel finish and built-in LED light. Heat and power surges wear out receivers over time, and when that happens the remote goes quiet. This replacement connects with wire nuts and restores three speeds, off and a dimmable light.

Before ordering, confirm the label on your fan says RS54BNK6LR. It pairs with learning-code remotes like our TR214D.

3 fan speeds plus off
Comfort Direct replacement receiver
Dimmable light control
Connects with wire nuts

Ladder safety

Use a ladder tall enough that you can work at shoulder height without standing on the top steps. Set it on level ground, keep tools in a pouch rather than on the top rung, and have a second person nearby when you lower the canopy.

Wobble and noise are not the receiver

A receiver controls power, so it will not fix a wobble or a clicking blade. Those usually come from loose blade screws or an unbalanced blade. If your fan wobbles, tighten the blade hardware and use a balancing kit; the receiver swap is a separate job.

Before you order

Send us your fan's model label or a photo of the old receiver and we'll confirm the fit before you order.
Some fans came with a plug-in receiver that has a square plug instead of wire-nut leads. Contact us if yours has a plug.

Setup & Pairing

Plan on about an hour, most of it spent at the canopy.

Start with the breaker: turn it off and check that the RS54BNK6LR is dead.
Lower the canopy and disconnect the old receiver, noting which wire went where.
Wire in the new receiver lead for lead, following your photo, and twist each wire nut snug.
Make sure other fans with learning receivers are switched off, so only this one learns the remote.
Bring the power back and press and hold the remote's 0 button within about 30 seconds; let go when the light blinks twice.
Check every speed, then turn the light on, off and dim it.

In the box: Replacement receiver for the RS54BNK6LR.

Product Details

Fan Model	RS54BNK6LR
Fan Brand	Litex
Product Type	Ceiling Fan Receiver
Made By	Comfort Direct
Condition	New
Fan speeds	3 + off
Light	On/off and dimming
Frequency	304.25 MHz
Pairing	Learning code, no DIP switches
Installation	Wire-nut connections
Warranty	1 year
Compatible Models	1 (see list)
Availability	In stock
Ships	Same business day if ordered by 4 PM
Returns	90 days on unused items

Not sure this is the right receiver?Our team will check it against your fan before you order.(816) 586-8457 · info@fanremotes.comMon–Fri, 8 AM – 5 PM CT

Why Buy From FanRemotes.com?

1-Year WarrantyEvery product is covered against defects
Same-Day ShippingIn-stock orders placed by 4 PM ship the same business day
90-Day Return PolicyBuy with confidence
Real Remote Experts(816) 586-8457 · Mon–Fri, 8 AM – 5 PM CT

Frequently Asked Questions

Will this replacement receiver for the Litex RS54BNK6LR fit my ceiling fan?

It fits the 1 model listed under Compatible Models on this page. If your model isn’t listed, call us at (816) 586-8457 and we’ll check for you.

How long does the swap take?

Most people finish in under an hour. Lowering the canopy and reconnecting the wires takes the longest; pairing takes about 30 seconds.

What if the fan hums after the swap?

Recheck that every wire nut is tight and that no wall dimmer is on the circuit. If it continues, contact us at (816) 586-8457.

What is the pairing process for your Rossman 54-in?

It uses learning-code pairing with no DIP switches. Restore power, then press and hold 0 on the remote within about 30 seconds until the light blinks twice.

Where do I find the model number on my fan?

On a label on top of the motor housing, and often on the fan box and manual. Turn the power off before you climb up to read it.

My fan stopped responding after a storm. Is it the receiver?

Quite possibly. Power surges often damage the receiver while the motor survives. Check the breaker and wall switch first.

When will my order ship?

In-stock orders placed by 4 PM, Monday to Friday, ship the same business day.

What is your return policy?

You can return items within 90 days. Items must be unused and uninstalled, in their original packaging. No restocking fees. Please read our return policy before sending anything back. Questions? Call (816) 586-8457 or email info@fanremotes.com.

Is there a warranty?

Yes. Every product we sell comes with a 1-year warranty against defects. If it fails because of a defect, contact us and we’ll send a replacement.