KUJCE10716 Ceiling Fan Remote Control for Harbor Breeze
- Part # KUJCE10716
- Ceiling Fan Remote
If you lost the KUJCE10716 for your Harbor Breeze ceiling fan, this replacement brings back three fan speeds, a light button and a wall mount.
$28.95
Ships today from FanRemotes.com
if ordered in the next
In stock
- 1-Year WarrantyOn every product
- Same-Day ShippingIn-stock orders by 4 PM
- 90-Day ReturnsSee return policy
- Expert Support(816) 586-8457Mon–Fri, 8 AM – 5 PM CT
Will This Remote Fit?
This remote is made to replace the KUJCE10716. Check the label on your old remote (often inside the battery cover) — if it reads KUJCE10716, this is the one you need.
Need help finding your model number? Not sure? Call (816) 586-8457 or email info@fanremotes.com.
About the Harbor Breeze KUJCE10716 Remote
Our replacement for the KUJCE10716 brings back High, Medium and Low, an Off key and a light button, so you can run your Harbor Breeze fan from across the room again. Flip the old remote over: KUJCE10716 sits after the FCC mark on the back label, sometimes inside the battery door instead. Some remotes marked KUJCE10716 came from a different maker than others built for these fans, so if yours carries this number, send us a photo and we'll confirm the match first.
Match the number first: this page is for the KUJCE10716. There are no DIP switches: cycle the power, press Learn, and it pairs.
- Runs on one 12V A23 battery (not included)
- 1-year warranty from our team
- Compact, about 2 x 4.5 inches
Oxford 52-in fans
The Oxford 52-in uses an AM-3L receiver, and it's the one AM-3L fan this remote pairs with. Other Harbor Breeze fans with color-changing AM-3L receivers, such as the Mac III, Reverdy and Crestwell, need a different remote. If yours is an Oxford, pairing works the same way: power cycle, then Learn.
Finding the Learn button
The Learn button sits inside the battery compartment, so open the cover before you touch the wall switch. It's small, and a fingertip or pen tip works fine. Have the remote ready in your hand, since the 30-second window starts the moment power comes back.
Before you order
- Some Harbor Breeze fans with a color-changing AM-3L receiver (Boltz III, Mac III, Reverdy, Flanagan III, Crestwell) need a different remote. Of the AM-3L fans, only the Oxford 52-in is a match.
Setup & Pairing
Here's how to pair the new remote with the receiver in your fan.
- Load the 12V A23 battery and leave the battery cover off so you can reach the Learn button.
- Turn the fan's power off at the wall switch or breaker.
- Wait a few seconds, then restore power.
- Press the Learn button in the battery compartment inside that 30-second window.
- The fan runs on low and the light turns off when pairing is done.
If two fans share the breaker, switch the other one off at its wall switch while you pair.
In the box: KUJCE10716 replacement remote, wall bracket, screws and printed instructions.
Product Details
| Part Number | KUJCE10716 |
|---|---|
| Fan Brand | Harbor Breeze |
| Product Type | Ceiling Fan Remote |
| Made By | Comfort Direct |
| Condition | New |
| Frequency | 304 MHz band |
| Pairing | Learning code with Learn button, no DIP switches |
| Battery | One 12V A23 (not included) |
| Fan speeds | 3 + off |
| Light | On/off, works with dimmable and non-dimmable light kits |
| Motor type | AC fans only |
| Wall mount | Bracket and screws included |
| Warranty | 1 year |
| Availability | In stock |
| Ships | Same business day if ordered by 4 PM |
| Returns | 90 days on unused items |
Why Buy From FanRemotes.com?
- 1-Year WarrantyEvery product is covered against defects
- Same-Day ShippingIn-stock orders placed by 4 PM ship the same business day
- 90-Day Return PolicyBuy with confidence
- Real Remote Experts(816) 586-8457 · Mon–Fri, 8 AM – 5 PM CT
Frequently Asked Questions
How do I pair it with my fan?
Turn the fan's power off at the wall, turn it back on, and press the Learn button inside the battery compartment within 30 seconds. The fan runs on low and the light turns off when it's paired.
Will it work with every Harbor Breeze fan?
No. It's for 3-speed AC fans with this learning-code receiver. Match the number on your old remote before you order.
Will it work with my light kit?
Yes. The light key turns the light on and off with dimmable and non-dimmable light kits alike.
I replaced my receiver and the fan won't respond. What do I do?
Pair the remote again. Cycle the fan's power, then press the Learn button within 30 seconds.
What battery does it take?
One 12V A23 battery. It is not included.
When will my order ship?
In-stock orders placed by 4 PM, Monday to Friday, ship the same business day.
What is your return policy?
You can return items within 90 days. Items must be unused and uninstalled, in their original packaging. No restocking fees. Please read our return policy before sending anything back. Questions? Call (816) 586-8457 or email info@fanremotes.com.
Is there a warranty?
Yes. Every product we sell comes with a 1-year warranty against defects. If it fails because of a defect, contact us and we’ll send a replacement.
Help & How-To Guides
- Harbor Breeze Ceiling Fan Remote: Find, Pair and Replace Yours
- Ceiling Fan Remote Not Working? How to Find and Fix the Problem
- How to Pair a Ceiling Fan Remote: Every Method Explained
- Ceiling Fan Remote DIP Switch Settings: Find, Match and Change Them
- Lost Ceiling Fan Remote? How to Find the Right Replacement
Related products
-


KUJCE10311 Harbor Breeze Ceiling Fan Remote Control Replacement
0 out of 5$26.95 Add to cart -


BRD48MWW6LR Harbor Breeze Ceiling Fan Remote Control Replacement
0 out of 5$26.95 Add to cart -


UC7030T Ceiling Fan Remote Control For Hampton Bay, Hunter, Harbor Breeze
0 out of 5$27.95 Add to cart -


CHQ7030T Ceiling Fan Remote Control For Hampton Bay, Hunter, Harbor Breeze
0 out of 5$27.95 Add to cart -


TR214D Harbor Breeze Ceiling Fan Remote Control Replacement
0 out of 5$26.95 Add to cart

