TG44MBK3D1RC LED Light Array Bulb for Harbor Breeze Beach Creek Fans
- Fan Model # TG44MBK3D1RC
- LED Light Kit
- Fits 1 model
Fix a dark light on your matte black Harbor Breeze Beach Creek 44-in, model TG44MBK3D1RC, with this warm white LED module and its DIY wiring connector.
$29.95
In stock
- 1-Year WarrantyOn every product
- Same-Day ShippingIn-stock orders by 4 PM
- 90-Day ReturnsSee return policy
- Expert Support(816) 586-8457Mon–Fri, 8 AM – 5 PM CT
Compatible Models
This replacement light kit for the Harbor Breeze TG44MBK3D1RC fits 1 model. Check the model number on your fan’s label.
- TG44MBK3D1RC Beach Creek 44-in, Matte Black (Lowe's item 1461039)
Not sure it’s the right one? Call (816) 586-8457 or email info@fanremotes.com and we’ll check it against your fan for you.
About the Harbor Breeze TG44MBK3D1RC Light Kit
If your Beach Creek 44-in is the matte black one, the label on top of the motor reads TG44MBK3D1RC. A dead LED leaves the whole fixture looking unfinished, and there is no bulb to swap. This module restores dimmable 3000K light and connects with the supplied wiring connector in a short afternoon job.
Match the number first: the label on the motor housing should read TG44MBK3D1RC. It connects to the fan's light wire with the included connector. There is nothing to pair, and the remote still dims it.
- Dimmable, like the original Beach Creek light
- Warm 3000K white, the same color as the factory LED
- No pairing needed
Work from a steady ladder
Light modules are not heavy, but you will be holding parts over your head. Use a ladder tall enough that you are not stretching, and keep small parts in a cup or tray. A helper who hands you screws, or holds the module while you connect it, makes the job faster.
Hold on to the old module
Keep the old module until the new light is up and working. Comparing them side by side shows you how the new one sits. Once you are happy, recycle the old board with electronics rather than household trash, where your area allows.
Before you order
- Check the model number on your fan's label: it should read TG44MBK3D1RC.
- If only the light is out, check the wall switch and the blue light wire from the receiver in the canopy.
Setup & Pairing
- Switch off the breaker for the fan before you start.
- Remove the light cover and the old LED module. Lowering the fan makes the job easier.
- Unhook the old module. A pin plug that will not match can be cut off and the wires joined with the supplied connector.
- Mount the new module on the fan's metal mounting plate and replace the cover.
- Restore power and try the light, including dimming, from the remote.
Tip: have a helper hold the module while you connect it.
In the box: One TG44MBK3D1RC replacement LED light module, plus a wiring connector and mounting hardware.
Product Details
| Fan Model | TG44MBK3D1RC |
|---|---|
| Fan Brand | Harbor Breeze |
| Product Type | LED Light Kit |
| Made By | Comfort Direct |
| Condition | New |
| Fan | Beach Creek 44-in, Matte Black |
| Color temperature | 3000K warm white |
| Dimming | Dimmable |
| Connection | Wiring connector included |
| Mounting | Mounting hardware included |
| Warranty | 1 year |
| Compatible Models | 1 (see list) |
| Availability | In stock |
| Ships | Same business day if ordered by 4 PM |
| Returns | 90 days on unused items |
Why Buy From FanRemotes.com?
- 1-Year WarrantyEvery product is covered against defects
- Same-Day ShippingIn-stock orders placed by 4 PM ship the same business day
- 90-Day Return PolicyBuy with confidence
- Real Remote Experts(816) 586-8457 · Mon–Fri, 8 AM – 5 PM CT
Frequently Asked Questions
Will this replacement light kit for the Harbor Breeze TG44MBK3D1RC fit my ceiling fan?
It fits the 1 model listed under Compatible Models on this page. If your model isn’t listed, call us at (816) 586-8457 and we’ll check for you.
Is this the light for the matte black TG44MBK3D1RC?
Yes. It is made for the Harbor Breeze Beach Creek 44-in Matte Black, model TG44MBK3D1RC.
Is it dimmable?
Yes. The module dims, just like the original Beach Creek light.
My fan runs but the light will not come on. Is it the LED?
It may be. First make sure the wall switch is on and the blue light wire from the receiver is connected in the canopy. If those are fine, the LED module has likely failed.
Is it plug-and-play?
It connects with the included wiring connector. On some fans the original pin plug will not match, so you cut it off and join the wires with the connector.
Do I have to take the fan down?
It is not always required, but lowering the fan makes the job easier and safer. Always turn off the breaker first.
When will my order ship?
In-stock orders placed by 4 PM, Monday to Friday, ship the same business day.
What is your return policy?
You can return items within 90 days. Items must be unused and uninstalled, in their original packaging. No restocking fees. Please read our return policy before sending anything back. Questions? Call (816) 586-8457 or email info@fanremotes.com.
Is there a warranty?
Yes. Every product we sell comes with a 1-year warranty against defects. If it fails because of a defect, contact us and we’ll send a replacement.
Help & How-To Guides
Related products
-


SW1422BN Home Decorators Collection Ceiling Fan LED Light Array Bulb Replacement
0 out of 5$29.95 Add to cart -


MZ44BNK3LR Harbor Breeze Ceiling Fan LED Light Array Bulb Replacement
0 out of 5$29.95 Add to cart -


TG44LW3D1RC LED Light Array Bulb for Harbor Breeze Beach Creek Fans
0 out of 5$29.95 Add to cart -


TG52OSB3D1RC LED Light Array Bulb for Harbor Breeze Beach Creek Fans
0 out of 5$29.95 Add to cart -


TG44MBK3D1RC LED Light Array Bulb for Harbor Breeze Beach Creek Fans
0 out of 5$29.95 Add to cart
